Convection Filling Type

The Filler adopt the convection filling type. This filling principle could prevent product polluted and increase filling speed.
The filler is suitable for tea drink, non granule juices, mineral water and etc.

Gravity Filling type

The filler adopt the gravity filling type and is suitable for filling fresh milk, drinking yogurt, fresh juices (content with fiber) and the temperature sensitivity products.

Piston Filling Type

The machine is piston and level positioning filling type and suitable for filling liquid which is high viscosity and content with granule such as yogurt, sauce and etc.

Equal pressure Type

The designs of this filler are two models bottle type and can type. The filler is suitable for filling plastic bottle type drinks, glass bottle type drinks or can type drinks such as Soda water, Champagne, Beer, Carbonated Soft Drinks and other carbonated beverage.

VPA-GL-SUP1

• Production from 3.000 up to 6.000 bph
• Base made of stainless steel with skeleton made of steel profiles.
• Panelling and removable parts made of stainless steel
• Conveyor belt and casing made of stainless steel
• Stopping device in case of jamming.
• Timing screw conveyor
• The distribution of the glue is given by the rubber gluing roll equipped with a
• scraper having automatic glue film adjustment by a pneumatic device
• The labelling unit consist of: oscillating labels holding magazine, gripper cylinder aluminium roll with gluing profiles for the entire surface of the label
• Pneumatic glue pump type “C 7
• Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber
• The central drive is by a gear reducer controlled

VPA-GL-SGV2

• Production up to 6.000 bph
• Base made of stainless steel with skeleton made of steel profiles Panelling and removable parts made of
• stainless steel Conveyor belt and casing made of stainless steel Stopping device in case of jamming
• Timing screw conveyor
• The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
• The labelling unit consist of: oscillating labels holding magazine, gripper cylinder with vacuum, aluminium roll with gluing profiles for the entire surface of the label.
• Pneumatic glue pump type C7 unit with pulleys, belts and rolling

VPA-GL-WA3

• Production from 3.000 up to 6.500 bph
• Base made of stainless steel with skeleton made of steel profiles
• Panelling and removable parts made of stainless steel
• Conveyor belt and casing made of stainless steel
• Stopping device in case of jamming.
• Timing screw conveyor
• The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
• The labelling unit consist of: Oscillating labels holding magazine, aluminium roll with horizontal strip gluing profiles. Fingers unit with stainless steel blades comb for a direct transfer of the label on the container
• Pneumatic glue pump type “C 7
• Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber
• The central drive is by a gear reducer controlled the inverter. Manual speed adjustment.

VPA-WGL-MG1

• Production from 2.200 up to 6.000 bph
• Oscillating label magazine
• 4,6,8,9 plates driven by maltese crosses movement
• Up to 4 labels application on cylindrical or shaped

VPA-WGL-MS1

• Production from 3.000 up to 28.000 bph
• Fix label magazine with rotating glue pallets
• 6,8,9,12,16,24 plates driven by greased gears or oil bath gears movement
• Up to 5 labels application on cylindrical or shaped containers

VPA-HGL-MS01

• Production up to 16.000 bph.
• Labelling machine type MEGA HOT is fully automatic and has been designed for the application of wrap-around paper and plastic pre-cut labels on cylindrical container.
• Model MEGA HOT has two versions: 12 or 16 plates, rotation by means of toothed pulleys according to the diameter of the containers. The rotation control is given by a fixed toothed belt with stretcher.MEGA
• HOT installs a NORDSON hot melt applicator to deliver adhesive to patented controlled fiberization guns onto the container first and then a slot gun integrated in the labelling magazine applies a vertical strip of adhesive on the trailing edge of the label for all its height sealing the label end. The Nordson aggregate has several advantages respect to the glue roll hot melt type, such as the absence of adhesive carbonisation, a minimum down time for cleaning and maintenance, minimization of adhesive waste.

Top Sealing Machine

Model: VPA-KV400

• Auto-transmit system, sealing cup with leakage free.
• Auto-carry on cup system. It suits for any capacity of beverage cups. it is quick and convenient to set cups and carry cups

FEATURE OF TABLE TYPE TOP SEALING MACHINE:

• Artistic and compact housing for easy operation
• Sanitary and convenient
• Easy for packing, quickly and safety
• Mobile design and space saving
• With electronic sensor, no sealing film misused.
• Suitable for any material of food container
• Advertisement can print on sealing film as propaganda.

MACHINE SPECIFICATION:

• Dimension: 400(L)x480(W)x620(H)mm
• Weight: 50kgs
• Power source: 110V/220V 500W
• Capacity: 500~700 Cups/per hr

Fully Automatic Rotary Sealing Machine

MODEL VPA-KV036A

MODEL VPA-KV036A is ana rotary food container aling machine, which can be used with auto-cup-drop-ping auto filling, auto-date-stamping, second-sealing, and lining-up and output equipment.

FEATURE OF ROTARY SEALING MACHINE

• Artistic and compact housing for easy operation
• Sanitary and convenient
• Easy for packing, quickly and safety.
• Mobile design and space saving
• With electronic sensor, no sealing film misused.
• Suitable for any material of food container.
• Advertisement can print on sealing film as propaganda.

MACHINE SPECIFICATION:

• Dimension: 900(L)x650(W)x1550(H)mm
• Weight: 120kgs
• Power source: 110V/220V 500W
• Capacity: 800~1200 Cups/per hr.

Remark: This unit requires a 2 hp air compressor (not include in our machine set)

Automatic Sealing Machine

MODEL VPA-KV3000

MODEL VPA-KV3000 is an automatic food container sealing machine, which can be used with auto-cup-drop-ping, auto filling, auto-date-stamping, second-sealing, and lining-up and output equipment.

FEATURE OF AUTOMATIC SEALING MACHINE:

• Artistic and compact housing for easy operation
• Sanitary and convenient
• Easy for packing, quickly and safety
• With electronic sensor, no sealing film misused
• Suitable for any material of food container
• Advertisement can print on sealing film as propaganda.

MACHINE SPECIFICATION:

• Dimension: 3000(L)x 1000(w)x1700(H)mm
• Weight: 1000kgs
• Power source: 220V 2kW
• Capacity: 2400 Cups/per hr.

Remark: This unit requires a 5 hp air compressor (not include in our machine set)
Application: Suitable for water, liquid, jelly and etc.

VPA-SAL-ADE1

• Production from 3.000 up to 9.000 bph
• Base made of stainless steel with skeleton made of steel profiles
• Paneling and removable parts made of stainless steel
• Conveyor belt and casing made of stainless steel Stopping device in case of jamming
• Timing screw conveyor
• The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
• Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber
• The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment

Labelling Machine

mega adu

• Production from 3.000 up to 9.000 bph
• Base made of stainless steel with skeleton made of steel profiles
• Paneling and removable parts made of stainless steel
• Conveyor belt and casing made of stainless steel Stopping device in case of jamming
• Timing screw conveyor
• The distribution of the glue is given by the rubber gluing roll equipped with a scraper having automatic glue film adjustment by a pneumatic device
• Stretching unit with pulleys, belts and rolling wall made of special anti-acid foam rubber
• The central drive is transmitted by a gear reducer controlled by the inverter. Manual speed adjustment

Power source: 3P/ 220VN 415V
Production rate: 100 BPM (label length 100mm)
Range of bottle diameter: 025 Ø130
Label insertion length: :25mm 180mm
Range of label thickness :0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4KW
Machine dimension (Lx W X H): 900 x 1080 x 2100 mm

Power source: 3P/ 220VN 415V
Production rate: 100 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø130
Label insertion length: 25mm ~ 180mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4KW
Machine dimension (Lx W X H): 900 x 1080 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 250 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 3KW
Machine dimension (Lx W X H): 1190 x 980 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 250 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 3KW
Machine dimension (Lx W X H): 1190 x 980 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 350 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4.5KW
Machine dimension (Lx W X H): 1190 x 1250 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 350 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4.5KW
Machine dimension (Lx W X H): 1190 x 1250 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 400 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 9KW
Machine dimension (Lx W X H): 1190 x 1250 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 450 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4.5KW
Machine dimension (Lx W X H): 1190 x 1250 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 450 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 4.5KW
Machine dimension (Lx W X H): 1190 x 1250 x 2100 mm

Power source: 3P/ 220V~ 415V
Production rate: 800 BPM (label length 100mm)
Range of bottle diameter: Ø25 ~ Ø125
Label insertion length: 25mm ~ 300mm
Range of label thickness: 0.035mm ~ 0.08mm
Material: PVC, PET, OPS
Main motor: 15KW
Machine dimension (Lx W X H): 1700 x 1375 x 2100 mm

VPA-SA-200A5
Low-speed stay applicator

Capacity: Approx.180 pcs/min. (=Approx. 11,000 pcs/hour)
Application Type: Hot-melt 0r Adhesive transfer tape
Applicable Package: Paper carton (Tetra, Combibloc, IP, Pure-pak, etc.), Plastic bottle/cup, pouch etc
Applicable Straw: I-shaped, U-shaped, Z-shaped, Periscopic, Telescopic, spoon and spoon-fork
Option:
1) Two head at double speed are available.
2) Top or Side application are available

VPA-SA-3000A6
High-speed straw applicator

Capacity: Approx.250 pcs/min. (=Approx. 15,000 pcs/hour)
Max capacity: Approx. 365 pcs/min. (=Approx. 22,000 pcs/hour) : (Depending on packages)
Application Type: Hot-melt or Adhesive transfer tape
Applicable Package: Paper carton (Tetra, Combibloc, IP, Pure-pak, etc.), Plastic bottle/cup, pouch etc
Applicable Straw: I-shaped, U-shaped, Z-shaped, Periscopic, Telescopic, spoon and spoon-fork
Option:
1) Two head at double speed are available.
2) Top or Side application are available

VPA-SA-1000A7

1. No need to place lips on cans or bottles any more
2. Specially designed to apply straws to can, round shaped cups and PET bottles at speed up to an incredible 1000 starts per minute.
3. Accurate placement of straws with adhesive transfer tape on the sides of cans or bottles by a unique double-headed mechanism.
4. Equipped with a Can Remover that automatically detects and gets rid of cans with no straws.

Capacity: Approx.1000 pcs/min. (=Approx. 60,000 pcs/hour) by two heads
Application Type: Adhesive transfer tape
Applicable Package: Can, Round shaped plastic cup, PET bottle.
Applicable Straw: Periscopic and Telescopic straws

Standard Features:

• 1650mm turntable
• 2500mm wrapping height
• the turntable always stops at the same home position
• can be selected either the automatic or manual run programmes
• select from 0-9 complete wraps on the top/bottom of the pallet
• height seeking by photo sensor
• advanced soft wraping device on the package angle
• wrapping tension/turntable speed/carriage speed are adjustable
• machine can be re-set during any part of the cycle
• can apply additional film to weak points in the pallet
• slow start and stop
• one-way idle roller to keep the film outside of the carriage when its broken
• film easy threading device

Specification:
Power Supply: Single phase
Max loading weight: 1600kgs
Max turning speed: 12 rpm
Max wrapping height: 2500mm
Film roll width: 500mm
Film roll inner diameter: 76mm

In-Line check weighing machine is used to check the weight of the packed product automatically in a factory floor. Each pack data result will be shown on the screen and stored in the system.

The machine is designed to be robust in construction to ensure it is long lasting in the harsh environment or conditions with easy maintenance cleanliness.

It can be interface with printer and computer for easy communication within the production floor.

Electric Heat Shrink Tunnel

Features

• Overall steel decoration with heat-resistant paint structure.
• Easy to install and operation, adjustment is convenient when change the product.
• Suitable for shrink variety bottle shapes, circle, square, oval-shaped, and curve-shaped etc.
• Accurately temperature control with +/- 5 degree.
• Achieve variety bottle shapes and product request by unique diversion wind force inside.

Power: 30Ø 220V – 380V
Motor: 0.75 kw
Heater: 12 kw
Machine Dimension: 2000 x 1000 x2000 (mm)
Tunnel Dimension: 2000 x 160 x 350 (mm)

Electric Heat Shrink Tunnel

Features

• Overall steel decoration with heat-resistant paint structure.
• Easy to install and operation, adjustment is convenient when change the product.
• Suitable for PVC, PET, OPS shrink packaging materials.
• Suitable for shrink variety bottle shapes, circle, square, oval-shaped, and curve-shaped etc.
• Accurately temperature control with +/- 5 degree.
• Achieve variety bottle shapes and product request by unique diversion wind force inside.

Power: 30Ø 220V – 380V
Motor: 0.75 kw
Heater: 12.2 kw
Machine Dimension: 1200 x 1200 x2000 (mm)
Tunnel Dimension: 1000 x 210 x 450 (mm)

Electric Heat Shrink Tunnel

Features

• Overall steel decoration with heat-resistant paint structure.
• Easy to install and operation, adjustment is convenient when change the product.
• Suitable for PVC, PET, OPS shrink packaging materials.
• Suitable for shrink variety bottle shapes, circle, square, oval-shaped, and curve-shaped etc.
• Accurately temperature control with +/- 5 degree.
• Achieve variety bottle shapes and product request by unique diversion wind force inside.

Power: 30Ø 220V – 380V
Motor: 1.5 kw
Heater: 34.6 kw
Machine Dimension: 2250 x 1200 x 2000 (mm)
Tunnel Dimension: 2000 x 210 x 450 (mm)

Steam Shrink Tunnel

Features

• Overall stainless steel structure.
• Easy to install and operation, adjustment is convenient when change the product.
• Suitable for PVC, PET, OPS shrink packaging materials.
• Suitable for shrink variety bottle shapes, circle, square, oval-shaped, and curve-shaped etc.

Power: 30Ø 220V – 380V
Motor: 0.75 kw
Steam Pressure: 0.5 – 2kg / cm2
Exhausted of steamL 450 kg / hr
Machine Dimension: 2800 x 500 x 1000 (mm)
Tunnel Dimension: 2800 x 150 x 420 (mm)

Shrink Tunnel Machine (Model: VPA-ST7A)

Features

Power: 1 phase / 220V / 50Hz / 5KW
Tunnel Size (LxWxH): 700 x 350 x 150 (mm)
Machine Dimension (LxWxH): 1180 x 620 x 1050 (mm)